Chevrolet Tahoe Spark Plug Wire Loom

MR GASKET SPARK PLUG WIRE DIVIDER BRACKETS, BRUSHED, 2 PIECES -- Designed To Minimize Crossfiring By Keeping The Ignition Wires Sufficiently Separated From Each Other, Can Accommodate 7 And 8mm Ignition Wires, Ideal For Competition And Street Use, With Mr...

MR GASKET UNIVERSAL SPARK PLUG WIRE LOOM KIT -- Plain, Made From Die Cast Aluminum, Designed To Preserve The Life Of Spark Plug Wires, Gives The Engine A Show Winning Edge, For Use On Engines With Center Bolt Valve Covers, With Manufacturer's Limited 90-D...

MR GASKET UNIVERSAL SPARK PLUG WIRE LOOM KIT -- Flamed, Made From Die Cast Aluminum, Designed To Preserve The Life Of Spark Plug Wires, Gives The Engine A Show Winning Edge, For Use On Engines With Center Bolt Valve Covers, With Manufacturer's Limited 90-...

TRANS-DAPT UNDER HEADER WIRE LOOM SET, BLACK -- Includes 2 Two Hole, 2 Four Hole Dividers, 4 Chrome Brackets, 2 Two Hole, 2 Three Hole, 2 Four Hole Separators, For 7mm, 8mm, And 9mm Wires, Provide Easy Removal And Installation Of Valve Covers...

MR GASKET COMPETITION SPARK PLUG WIRE LOOM KIT, BLUE -- Made From Heat Resistant Plastic, Designed To Minimize %X93Cross Firing%X94 By Keeping The Ignition Wires Sufficiently Separated From Each Other, Can Accommodate 7 And 8mm Ignition Wires, Ideal For C...

ACCEL 5MM COMPETITION SEPARATOR KIT, BLACK -- Specially Made For Racing Or Street Use Where Extreme High Temperatures Causes Normal Materials To Literally Sag Or Melt, Made Of Glass Fiber Reinforced High Temperature Polymer Rated To 400 Degrees Fahrenheit...

TAYLOR CABLE CLIP-ON WIRE SEPARATOR, RED -- 7-8 Mm Wire Size, Made Of Tough Nylon That Can Withstands 400 Degrees Fahrenheit, With Manufacturer's Limited 90-Day Warranty...

TAYLOR CABLE V-8 VERTICAL WIRE LOOM KIT, BLACK -- 10.4 Mm Wire Size, Each Kit Contains Two -2 Wire Separator, -3 Wire Separator, -4 Wire Separator And 6 Vertical Brackets, Allows The Wires To Be Run Vertically Close To The Valve Cover And Away From The Ex...

TAYLOR CABLE CLAMP STYLE WIRE SEPARATOR, BLUE -- For "409" 10.4mm Wires, Molded From Non-Conductive Type 6/6 Nylon, Designed To Separate, Organize, And Support Ignition Wires, Will Not Melt, Mar, Distort, Crack, Or Fade, Offers Neat Professional Look, Wit...

ACCEL 8.5/9MM STYLIZED WIRE SEPARATOR, BLUE -- A Great Looking Separator That Helps In Maintaining A Clean Look In Your Engine Bay, Keeps The Plug Wires Properly Spaced To Eliminate Cross Fire While Enhancing The Engine Appearance, Uses A Glass Fiber Rein...

ACCEL 7/8MM STYLIZED WIRE SEPARATOR, BLUE -- A Great Looking Separator That Helps In Maintaining A Clean Look In Your Engine Bay, Keeps The Plug Wires Properly Spaced To Eliminate Cross Fire While Enhancing The Engine Appearance, Uses A Glass Fiber Reinfo...

ACCEL 8 MM COMPETITION SEPARATOR KIT, YELLOW -- Specially Made For Racing Or Street Use Where Extreme High Temperatures Causes Normal Materials To Literally Sag Or Melt, Made Of Glass Fiber Reinforced High Temperature Polymer Rated To 400 Degrees Fahrenhe...

MR GASKET 2-WIRE LOOM SET, TALL, CHROME PLATED, 2 PIECES -- Designed To Minimize %X93Cross Firing%X94 By Keeping The Ignition Wires Sufficiently Separated From Each Other, Can Accommodate 7 And 8mm Ignition Wires, Ideal For Competition And Street Use, Wit...

ACCEL 8.8-9 MM COMPETITION WIRE LOOM KIT -- Specially Made For Racing Or Street Use, Includes 2 Four-Wire Looms, 2 Three-Wire Looms, 4 Two-Wire Separators, And 4 Sturdy Chrome-Plated Steel Loom Brackets, With Manufacturer's Limited 90-Day Warranty...

TAYLOR CABLE VERTICAL WIRE SEPARATOR BRACKET, RED, 4 PIECES -- Made Of Type 6/6 Nylon, Mounts Clamp Style Separators To Valve Covers, With Manufacturer's Limited 90-Day Warranty...