Pro Comp Add-A-Leaf
The Pro Comp Add-A-Leaf kits are a good means to add 1 ½ to 2 1.2 inches of ride height to your vehicle without completely overhauling your suspension. Included in each add-a-leak kit are the long rear add-a-lift with increased ground clearance and strength and short rear add-a-leaf. Both of which are direct fit for easy installation. This add-a-leaf from Pro Comp is an easy and economical way to increase ride height and spring rate without the necessity to change the whole spring. It is definitely perfect for vehicles that take on extra weight on some occasions such as trailers or campers. It allows installation of larger tires on your truck, hence giving you the lift you truly desire with the strength you need. Now you can augment your stock rear spring packs with some extra lift courtesy of Pro Comp. The key to the strength and flexibility of this amazing tool is the shot-peening treatment. This is a process that compresses the steel surface with heavy steel hot. As a result, the leaf remains strong and flexible at the same time. For all you know, this is very ideal for smooth and rear-end strength. Basically, add-a-leaf springs are pre drilled for center pin in the exact location your factory springs pack requires. They are also tapered on the ends for added flexibility and an easier fit with stock leafs. Adding a leaf serves a variety of purposes for your lift springs. It adds the towing capacity or hauling capacity, and increases stability while maintaining the height. It raises the ride height of your suspension by exactly the same amount. It gets incorporated into the spring pack with supplied center pins.
