Ford Racing Radiator Hose Kit
The radiator hose is located at either end of the vehicle's radiator and goes inside it into the top or into the bottom of the engine. It works to control the flow of the coolant to the radiator and is made of high flexible rubber compound that is designed with a high resistance to heat and oil. Among many of today's vehicles, the radiator hose is molded with two or more hose designs. It employs direct coolant to the heater, the expansion tank, and the turbocharger in the vehicle. Time after time, the radiator hose has the tendency to get damaged and eventually fail due to heat and contamination. When the radiator hose begins to wear, you may notice cracking and an obvious signs of leaking in it. If these signs are present, better replace your auto's radiator hose immediately to avoid severe damage in the radiator and the engine. The Ford Racing Radiator Hose Kit is a good choice when replacing your stock hose. It is composed of six high quality molded hoses for the upper and lower thermostat bypass. It also includes three heater core hoses for A/C equipped Mustang. Together with these, the kit also comes with 12 special hose clamps with inner band for the silicone hoses. Some radiator hoses come in a standard color of blue or optional black, red, green, purple, bright yellow, and orange with a high gloss finish. These have been designed to meet the required standard hose max temperature of 170 C or 338 F and have a size tolerance of 0.5mm.
