The Ford Racing Caliper Hardware Kit is a set of tools that you may not want to omit in your line of tools and gadgets for the purpose of maintenance and future repairs of your vehicle. This is very important during your day to day encounter with automotive problems and troubleshooting. The brake calipers are the brake components which house the brake pads and the pistons. The pistons are usually made from aluminum or chrome-plated iron.

There are two types of calipers: the floating and the fixed. The fixed caliper does not move relative to the disc. The part uses one or more pairs of pistons to clamp from each side of the disc, and is more complex and expensive than the floating caliper. The floating caliper, on the other hand, moves with respect to the disc.

A piston on one side pushes the inner brake pad until it makes contact with the braking surface, then pulls the caliper body with the outer brake pad so that pressure is applied to both sides of the disc. The floating caliper design is subject to failure due to sticking that can occur because of dirt or corrosion which can accumulate when the vehicle is not regularly checked. This will cause the pad attached to the caliper to rub against the disc even when the brake is released. This can reduce fuel efficiency and cause excessive wear on the pad. Thus, it is paramount to find the most dependable hardware when repair is needed. The caliper hardware kit typically consists of 2 coarse thread banjo bolts, 4 washers, and can be used to install the front calipers. Solve your automotive problems on your own with the help of the Ford Racing Caliper Hardware Kit. Perform your daily troubleshooting routines easily and feel like a pro!